17704692435
Provides the PICS proforma for the Distributed Transaction Processing Protocol as specified in ITU-T Rec. X.862 ISO/IEC 10026-3 in compliance with the relevant requirements, and in accordance with the relevant guidance, given in CCITT Rec. X.291 ISO/IEC 9646-2.
电子版：1044元
/ 折扣价：
888 元
This International Standard specifies the conditions for conformance testing; the environments in which the cartridges are to be operated and stored; the mechanical, physical and dimensional characteristics of the case and of the cartridges, so as to provide mechanical interchangeability between the data processing systems; the format of the information on the disk, both embossed and user-written, including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; the characteristics ofthe embossed information on the disk; the magneto-optical characteristics of the disk, enabling processing systems to write onto the di.
Defines the command set extensions for SCSI storage array devices; commonly known as RAID devices. This standard is principally intended to be used in conjunction with, not as an alternate to, any of the SCSI command standards nor to the SCSI-3 Architecture Model (ISO/IEC 14776-411) standard. This international standard is intended as an alternate to the SCSI-3 Controller Command (ISO/IEC 14776-341) standard.
Provides guidance on the operational testing of biometric systems; specifies performance metrics for operational systems; details data that may be retained by operational systems to enable performance monitoring; and specifies requirements on test methods, recording of data, and reporting of results of operational evaluations.
Defines various code points and fields that establish properties of an audio stream that are independent of the compression encoding and bit rate. These properties could describe the appropriate interpretation of decoded audio data or could, similarly, describe the characteristics of such signals before the signal is compressed by an encoder that is suitable for compressing such an input signal.
Describes the minimum requirements when the required activities specified by an Application Security Control (ASC) are replaced with a Prediction Application Security Rationale (PASR). The ASC mapped to a PASR define the Expected Level of Trust for a subsequent application. In the context of an Expected Level of Trust, there is always an original application where the project team performed the activities of the indicated ASC to achieve an Actual Level of Trust. The use of Prediction Application Security Rationales (PASRs), defined by this document, is applicable to project teams which have a defined Application Normative Framework (ANF) and an original application with an Actual Level of Trust.
Fibre Channel Avionics Environment (FC-AE), Technical Report INCITS TR-31-2002 [2], is a group of protocols and profiles that specify Fibre Channel options for devices connected by fabric and/or loop topologies that are pertinent to their use in commercial and military aerospace industries. The primary areas of interest include avionic command, control, instrumentation, simulation, signal processing, and sensor/video data distribution. These application areas are characterized by a variety of requirements, among them a need for high reliability, fault tolerance, and deterministic behavior to support real-time control/response.
The FC-AE-2 task group determined that it was best to allow profiles defined in the FC-AE technical report to be updated independently. This technical report is the first update to the FC-AE-ASM protocol since FC-AE was released. This technical report is recommended for new designs, but does not obsolete clause 4.1 in INCITS TR-31-2002 [2].
The primary objective of this technical report is to maximize the likelihood of interoperability between conforming implementations. This technical report Prohibits or Requires features that are optional and Prohibits the use of some non-optional features in the referenced ANSI INCITS standards. A second objective of this technical report is to simplify implementations and their associated documentation, testing, and support requirements. This technical report does not define internal characteristics of conformant implementations. This technical report incorporates features from the referenced ANSI INCITS standards.
Provides a six-digit number that is used to track lost or stolen physical securities in the United States.
This standard (1) lists the preferred and common sheet sizes of bond papers and index bristols and their applicable tolerances; (2) cross references to metric sizes, and (3) references a standard test method.
This standard for an unrecorded cartridge containing 0.250-inch (6.30 mm) magnetic tape presents the minimum requirements for the mechanical and magnetic interchangeability of the cartridge between information processing systems, communications systems, and associated equipment using the American National Standard Code for Information Interchange, ANSI X3.4:1977 (ASCII).
对不起，暂未有相关搜索结果！
