Documents the commands and parameters necessary to manage and sense the state of the power supplies, cooling devices, displays, indicators, individual drives, and other non-SCSI elements installed in an enclosure. The command set uses the SCSI SEND DIAGNOSTIC and RECEIVE DIAGNOSTIC RESULTS command to obtain configuration information for the enclosure and to set and sense standard bits for each type of element that may be installed in the enclosure.
Specifies the conformance and reference software implementing ISO/IEC 23093-3. The information provided is applicable for determining the reference software modules available for ISO/IEC 23093-3, understanding the functionality of the available reference software modules, and utilizing the available reference software modules.
Provides guidance for product and service acquirers, as well as suppliers of hardware, software, and services.
Defines the characteristics for identification cards as defined in Clause 3 of this document and the use of such cards for international interchange.
This standard is one of a set of International standards produced to facilitate the interconnection of information processing systems.
The scope of this technical report includes all of the elements necessary to provide a small, easily manageable SAN environment.
Defines key establishment schemes that employ asymmetric cryptographic techniques. The arithmetic operations involved in the operation of the schemes take place in the algebraic structure of an elliptic curve over a finite field. Both key agreement and key transport schemes are specified. The schemes may be used by two parties to compute shared keying data that may then be used by symmetric schemes to provide cryptographic services, e.g., data confidentiality and data integrity. Supporting mathematical definitions and examples are also provided.
The requirements of this Standard apply to: a) Internal combustion engine杙owered, hand-held, grass trimmers intended for use with flexible nonmetallic line, or other types of nonmetallic cutting attachments, and b) Internal combustion engine杙owered, hand-held, brushcutters intended for use with cutting blades and other cutting attachments. NOTE ?If a grass trimmer is marketed by the manufacturer as convertible to a brushcutter, then the converted unit shall comply with requirements for brushcutters and vice-versa. A convertible unit may be marketed as a grass trimmer or a brushcutter without including the devices required for conversion in the packaging, provided the operator manual clearly addresses the need to acquire and use the required conversion devices and the manufacturer makes such devices available as optional equipment.
This standard specifies the general, physical, and magnetic requirements for interchangeability for the two-sided, 5.25~in (130-mm), 96-tracks-per-inch (tpi) (3,8-tracks-per-millimeter (tpmm)) flexible disk cartridge (for 13 262 flux-transitions-per-radian (ftpr) use) as required to achieve unformatted disk cartridge interchange among disk drives using 77 or 80 tracks per side and associated information processing systems. The two-sided flexible disk cartridge enclosed in a protective envelope and having two recording surfaces is of the type intended specifically for use with digital recording and reproducing equipment employing access mechanisms capable of positioning to these data tracks.
The primary purpose of this standard, Homeland Security Mapping Standard - Point Symbology for Emergency Management, is to establish a common set of symbols for use by mapmakers in support of emergency managers and first responders. It will allow users to rapidly interpret map data and to be able to disseminate consistent, usable information. This American National Standard is applicable to all organizations that create maps or otherwise display features for the Emergency Management or First Responder communities. It is limited at this time to support portrayal of point features that relate to the emergency management and hazard mapping disciplines.