本标准规定了用卡尔·费休库仑电量法和电解法测定微量水分的通用试验方法。本标准适用于制冷剂用氟代烯烃中微量水分的测定,其中电解法不适用于低压制冷剂用氟代烯烃。
This standard specifies of the general methods using Karl Fischer coulometric titration method and electrolytic method for the determination of moisture.
This standard is applicable to the determination of moisture in fluorinated olefins for refrigerant use,electrolytic method is not applicable to fluorinated olefins for low pressure refrigerants use.
本标准规定了工业用2,3,3,3-四氟丙烯(HFO-1234yf,亦可简称为:R1234yf)的要求、试验方法、检验规则、标志、包装、运输、贮存和安全。
本标准适用于以四氯丙烯、五氟丙烷等为原料,用气相法或液相法,在催化剂作用下和无水氟化氢反应,精制而得2,3,3,3-四氟丙烯(HFO-1234yf),主要以单工质或混合工质用来替代四氟乙烷(HFC-134a)。
本标准规定了工业用反式-1,3,3,3-四氟丙烯[HFO-1234ze(E),亦可简称为:R1234ze(E)]的要求、试验方法、检验规则、标志、包装、运输、贮存和安全。
本标准适用于以四氯丙烯、五氟丙烷等为原料,用气相法或液相法,在催化剂作用下和无水氟化氢反应,精制而得反式-1,3,3,3-四氟丙烯[HFO-1234ze(E)],主要以单工质或混合工质用来替代四氟乙烷(HFC-134a)。
本标准规定了工业用乙醇的产品分类、要求、试验方法、检验规则及标志、包装、贮存、运输和安全。
本标准适用于工业用乙醇。
本标准规定了工业用1,1,1,2-四氟乙烷(HFC-134a,亦可称为R134a)的要求、试验方法、检验规则、标志、包装、运输和贮存以及安全。
本标准适用于工业用1,1,1,2-四氟乙烷。
本标准规定了用气相色谱法测定制冷剂用氟代烯烃不凝性气体的通用试验方法的样本、试验方法、结果表述等。本标准适用于中压和高压制冷剂用氟代烯烃不凝性气体的测定。本试验方法检测灵敏度为0.02%(体积分数)。
This standard specifies the samples, the test methods and the result expressions of the general method using gas chromatography for the determination of non-condensable gas (NCG) in fluorinated olefins for refrigerant use.
This standard is applicable to the determination of NCG in medium and high pressure fluorinated olefins refrigerants.The sensitivity of this method is 0.02% by volume.
本标准规定了用浊度法测定制冷剂用氟代烯烃中氯化物(Cl-)的通用试验方法的采样、方法原理、试验方法、结果表述等。
本标准适用于制冷剂用氟代烯烃中氯化物的测定。本试验方法检测灵敏度为0.000 3%。
This standard specifies the sampling, the principle, the test method and the result, etc.
This standard is applicable to the determination of chloride (Cl-) in fluorinated olefins for refrigerant use.The sensitivity of this method is 0.000 3%.