17704692435
本标准规定了气瓶外测法水压试验用标准瓶标定的方法及试验装置的基本要求。
本标准适用于气瓶外测法水压试验用标准瓶的标定。
电子版：31元
/ 折扣价：
27 元
This part of GB/T 5099 specifies minimum requirements for structure and parameter,technical requirements,test method,test and inspection rule,marking,coating,package,transportation and storage,product certificate and batch inspection quality certificate of quenched and tempered seamless steel cylinders(hereinafter referred to as steel cylinders)with tensile strength less than 1 100 MPa.
This part of GB/T 5099 is applicable to refillable steel cylinders of design and construction with nominal working pressure not greater than 30 MPa,nominal water capacities of 05 L to 150 L and service temperature with range of -40 ℃ to 60 ℃,which is used for filling compressed gas,highpressure liquefied gas or gas mixture.
This part of GB/T 5099 does not apply to the gas cylinder for vehicle and cylindrical pressure vessel attached to machines and equipment.
GB/T 5099的本部分规定了正火或正火后回火处理的钢质无缝气瓶（以下简称钢瓶）的型式和参数、技术要求、试验方法、检验规则、标志、涂敷、包装、运输、储存、产品合格证和批量检验质量证明书。本部分适用于设计、制造公称工作压力不大于15 MPa，公称水容积为0.5 L～150 L，使用环境温度为-20 ℃～60 ℃，用于盛装压缩气体或高压液化气体的可重复充装的钢瓶。本部分不适用于车用气瓶和机器设备上附属的瓶式压力容器。注： 对于公称水容积小于0.5 L的钢质无缝气瓶也可参照本部分进行制造及检验。
This part of GB/T 5099 specifies minimum requirements for structure and parameter,technical requirements,test method,test and inspection rule,marking,coating,package,transportation and storage,product certificate and batch inspection quality certificate of normalized cylinders (hereinafter referred to as steel cylinders).
This part of GB/T 5099 is applicable to refillable steel cylinder of design and construction with nominal working pressure not greater than 15 MPa,nominal water capacities of 0.5 L to 150 L and service temperature with range of -20 ℃ to 60 ℃,which is used for filling compressed gas or high-pressure liquefied gas.
This part of GB/T 5099 does not apply to the gas cylinder for vehicle and cylindrical pressure vessel attached to machines and equipment.
本标准规定了自闭式液化石油气瓶阀（以下简称“阀”）的术语和定义、阀的型号表示方法、结构型式及基本尺寸、技术要求、检查与试验方法、检验规则、标志、包装、贮运。本标准适用于使用环境温度为-40 ℃～+60 ℃，公称工作压力不大于2.5 MPa，适用介质符合GB 11174 的液化石油气钢瓶上的自闭式瓶阀。本标准不适用于车用液化石油气瓶阀。注： 本标准的压力均指表压。
GB/T 34530的本部分规定了低温绝热气瓶用调压阀（以下简称“阀”）的术语和定义、基本型式、技术要求、试验方法、检验规则、标志、包装、运输、贮存、产品合格证及产品批量检验质量证明书。本部分适用于公称工作压力不大于3.5 MPa，设计温度为-196 ℃～+85 ℃，环境温度为-40 ℃～+60 ℃，调压范围为0.2 MPa～3.5 MPa，介质为液氧、液氮、液氩、液化天然气、二氧化碳、氧化亚氮等气瓶用调压阀。
GB/T 5099的本部分规定了不锈钢无缝气瓶(以下简称“钢瓶”)的术语和定义、符号、型式和参数、技术要求、试验方法、检验规则、标志、包装、运输、储存、产品合格证和批量检验质量证明书。本部分适用于设计、制造公称工作压力不大于30 MPa，公称容积不大于150 L，使用环境温度为-40 ℃～60 ℃，用于盛装压缩气体或液化气体的可重复充装的移动式钢瓶。本部分不适用于运输工具上和机器设备上附属的瓶式压力容器。
This part of GB/T 5099 specifies minimum requirements for structure and parameter,technical requirements,test method,test and inspection rule,marking,coating,package,transportation and storage,product certificate and batch inspection quality certificate of seamless stainless steel cylinders(hereinafter referred to as steel cylinders).
This part of GB/T 5099 is applicable to refillable and transportable steel cylinder of design and construction with nominal working pressure not greater than 30 MPa,nominal water capacities not greater than 150 L and service temperature with range of -40 ℃ to 60 ℃,which is used for filling compressed gas or liquefied gas.
This part of GB/T 5099 does not apply to the gas cylinder for vehicle and cylinder-type pressure vessel attached to machines and equipment.
本标准规定了车用压缩氢气铝内胆碳纤维全缠绕气瓶(以下简称气瓶)的型式和参数、技术要求、试验方法、检验规则、标志、包装、运输和储存等要求。本标准适用于设计制造公称工作压力不超过70 MPa、公称水容积不大于450 L、贮存介质为压缩氢气、工作温度不低于-40 ℃且不高于85 ℃、固定在道路车辆上用作燃料箱的可重复充装气瓶。注： 氢燃料电池城市轨道交通等供氢用气瓶可参照本标准进行制造及检验。
对不起，暂未有相关搜索结果！
