本标准规定了带G5或G13灯头、用于带G5或G13灯座不带镇流器的灯具中的双端集成式LED灯的术语和定义、规格分类与命名、技术要求、试验方法和检验规则。
本标准适用于额定功率为60 W及以下、频率为50 Hz、额定电压为AC220 V、标称长度为1 500 mm及以下、光束角为120°及以上的双端集成式LED灯。
本标准还适用于对灯具进行改动、将镇流器断开的改装型双端集成式LED灯。
注1: 除非有特别指明是其他类型的灯,在本标准中出现的“灯”代表“双端集成式LED灯”。
注2: 额定电压为灯具的电源电压。
This standard specifies the terms and definitions, specification classification and nomenclature, technical requirements, test methods and test rules of double-capped integrated LED lamps with G5 or G13 caps and for luminaries with G5 or G13 lamp bases but without ballasts.
This standard is applicable to double-capped integrated LED lamps, having:
—a rated power up to 60 W;
—a frequency of 50 Hz and a rated voltage of AC 220 V;
—a nominal length up to 1 500 mm;
—a beam angle of 120° and above.
This standard is also applicable to modified double-capped integrated LED lamps where modification in the luminarie is required and the ballasts are disconnected.
NOTE 1 Where in this standard the term "lamp(s)" is used, it is unterstood to stand for "double-capped integrated LED lamp(s)", except where it is obviously assigned to other types of lamps.
NOTE 2 The rated voltage is the power supplied to the luminaries.
本标准规定了钪钠系列金属卤化物灯的分类与命名、主要尺寸、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。
本标准适用于功率为50 W~2 000 W透明玻壳的钪钠系列单端和双端金属卤化物灯。
注: 在本标准中用“灯”代表“钪钠系列金属卤化物灯”,除非特别指明是其他类型的灯。
本标准规定了室内和类似场合普通照明用有机发光二极管(OLED)光片和面板的安全要求。
本标准适用于不超过120 V直流电源或不超过50 V频率为50 Hz或60 Hz交流电源供电的OLED光片和面板。
注1: 现阶段只提供了直流供电OLED面板的试验方法,交流供电OLED面板的相应条款在考虑中。
注2: OLED光片和面板的结构如附录A所示。
注3: 包含OLED面板或模块的OLED照明系统如附录D所示。
本标准规定了带G5和G13灯头、用于替换相同灯头并且符合GB/T 10682规定荧光灯的双端LED灯的术语和定义、产品分类与型号、技术要求、试验方法和检验规则。本标准适用于额定功率为125 W及以下、频率为50 Hz、额定电压为AC 220 V、标称长度为1 500 mm及以下、光束角为120°及以上的双端LED灯(替换直管形荧光灯用)。此类双端LED灯用于替换双端荧光灯而不需要对灯具进行任何改动。装入替换用双端LED灯的现有灯具可以是含有电感或电子控制装置的灯具。
This standard specifies the terms and definitions, product classification and model, technical requirements, test methods and inspection rules of double-capped LED lamps with G5 and G13 lamp caps, which are used to replace the same lamp caps and conform to the provisions of GB/T 10682.
This standard is applicable to double-capped LED lamps with rated power of 125 W and below, frequency of 50 Hz, rated voltage of AC 220 V, nominal length of 1 500 mm and below and beam angle of 120° and above (for replacing liner fluorescent lamps).
This kind of double-capped LED lamps is used to replace the double-capped fluorescent lamp without any modification to the luminaire.
The existing luminaire to be installed with replaced double-capped LED lamps could be the with magnetic or electronic controlgear.
NOTE 1 Unless otherwise specified, "lamp" in this standard represents "double-capped LED lamps (for replacing liner fluorescent lamps)".
NOTE 2 The
本标准规定了普通照明用无极荧光灯的分类和型号、标志、尺寸、启动特性、电特性、光特性、光通维持率和寿命及其试验方法。
本标准规定了陶瓷金属卤化物灯的分类与命名、主要尺寸、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于功率为20 W~400 W的单端和双端陶瓷金属卤化物灯。〓〓注: 在本标准中出现的“灯”代表“陶瓷金属卤化物灯”,除非特别指明是其他类型的灯。符合本标准和GB 19652的陶瓷金属卤化物灯,当采用符合附录A和附录B要求的镇流器、触发器和灯具时,在额定电源电压的92%~106%范围内,可以正常启动和燃点。
本标准规定了钠铊铟系列金属卤化物灯的产品型号、主要尺寸、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于功率为250 W~2 000 W钠铊铟系列金属卤化物灯(以下简称灯)。
本标准规定了几种用于检测荧光灯含汞量的样品制备方法。本标准适用于检测荧光灯(包括单端、双端、自镇流和冷阴极荧光灯)灯管中汞含量(0.1 mg或更多),但不适用于寿终的灯。本标准不包括全部测量信息,详细测量部分在IEC 623214中说明。